Lan Setup; Router Settings; Dhcp Server Settings (Optional) - D-Link DSL-2600U User Manual

LAN Setup

The section allows you to configure the local network settings of your
router.

Router Settings

The following table describes the labels in this screen.
LABEL
Router IP Address
Subnet Mask
When you are making changes, click on Save Settings to save your
changes.

DHCP Server Settings (Optional)

Dynamic Host Control Protocol (DHCP), when enabled, gives out IP
addresses to a device that requests an IP address to be logged on to
the network as it boots up. A device must be configured as a DHCP
client to obtain the IP address automatically. The DHCP address pool
contains the range of the IP address that will automatically be
assigned to the clients on the network.
Enter the IP address you wish to use with your LAN here.
Enter the IP subnet mask you wish to use with your LAN here.
23
DESCRIPTION