Table of Contents
Advertisement
6 − Recording
Using the sampling rate converter
The SS-R1/SS-R05 contains a built-in sampling rate
converter, allowing you to record at a sampling rate that is
different than the sampling rate of the digital input source.
Use the menu to turn the sampling rate converter (SRC) on/
off (for details on menu operations, refer to "Operations in
the menu screens" on page 16).
1
Press the
key to access the main menu list
MENU
screen.
2
Open the REC menu.
3
Highlight the PREFERENCE item.
4
Press the front panel ˚ key (or the remote's
¥ key) to proceed to the REC PREFERENCE
screen.
Monitoring the input signal
When you press the
RECORD
ready condition, the front panel
key will light, and the input signal will be output from the
SS-R1/SS-R05's various output jacks (headphone, analog
balanced, analog unbalanced, and digital). The meter in the
home screen will indicate the input level.
STOP key
READY key
To cancel the record-ready condition, press the
36
TASCAM SS-R1/SS-R05
cursor
key to enter the record-
key and
RECORD
READY
RECORD key
STOP
key.
5
Select the SRC item.
6
Turn the
MULTI JOG
dial (or use the remote's
§ , ¶ keys) to turn the SRC setting
7
When you've finished making the setting, press the
front panel
TIME (ESC)
key (or the remote's
key) to return to the home screen.
ESC
NOTE
If a digital signal whose sampling rate differs from
•
the sampling rate specified in the REC FORMAT item
is being received at the DIGITAL IN jack, and you
attempt to record with SRC off, an error message (
) will appear.
UNMATCH
The sampling rate setting is remembered even when
•
the power is turned off.
TIP
If you simply want to monitor the input signal without
•
intending to record anything, press the RECORD key
without a CompactFlash card inserted. The display will
indicate
, and the RECORD key will blink
MON I TOR
red.
To stop monitoring the input signal, press the
•
key.
cursor
/
.
ON
OFF
CLR/
FS
STOP
Advertisement
Table of Contents
