4 − Preparations
Turning the power on
Press the
switch to turn the power on.
POWER
The SS-R1/SS-R05 will start up, and the startup screen
will appear (The example screen is from an SS-R1 unit.).
If no CompactFlash card is inserted, the display will
indicate
.
NO MED I A
Setting the date and time
Here's how to set the date and time of the internal clock.
When you record, the date and time are recorded in the
audio file.
1
Press the
MENU
key to access the menu list screen.
2
Turn the front panel
MULTI JOG
remote's cursor § , ¶ keys) to highlight the
UTILITY item, and press the
remote's
key).
ENTER
The UTILITY menu selection screen will appear.
NOTE
This is an example of a screen from an SS-R1 unit. The
SS-R05 menu does not show the "5. RS-232C item."
3
Turn the front panel
MULTI JOG
remote's cursor § , ¶ keys) to highlight the CLOCK
ADJUST item, and press the front panel ˚ key (or
the remote's cursor ¥ key).
The clock setting screen will appear.
18
TASCAM SS-R1/SS-R05
dial (or use the
dial (or the
MULTI JOG
dial (or use the
If a CompactFlash card is inserted, the display will
indicate
, and the card will be read.
MED I A READ I NG
When reading is completed, the home screen will appear.
To turn the power off:
No special shutdown operation is required. Simply
press the
switch to turn the power off.
POWER
CAUTION
Do not turn the power off while the CF indicator is blink-
ing (indicating that data is being written).
4
Press the front panel
MULTI JOG
remote's
ENTER
key).
will be highlighted.
07
5
Set the date and time as follows.
• Use the front panel ∆ , ˚ keys (or the remote's
cursor ˙ , ¥ keys) to move the highlighted area to edit.
• Turn the front panel
MULTI JOG
remote's cursor § , ¶ keys) to change the value
highlighted.
6
When you've finished making settings, press the
front panel
MULTI JOG
key) to finalize the date and time settings.
ENTER
dial (or the
dial (or use the
dial (or the remote's