Table of Contents
Advertisement
Accepting a waiting call
You are making an external call and hear the
call waiting tone.
§Accept§
Press the display key.
Once you have accepted the waiting call,
you can switch between the two callers
¢
("Call
swapping"
both at the same time ("Conference"
¢
page
64).
Please note
u
Without CLIP, a waiting call is only
announced with a signal tone.
u
An internal, waiting call is shown on
the display. You can neither accept
the internal call nor reject it.
u
For instructions on accepting a wait-
ing external call during an internal
¢
call,
page
115.
Rejecting a waiting call
You can hear the call waiting tone but do not
want to speak to the caller.
On the fixed line connection:
¢
§Options§
Reject Waiting call
On the ISDN or IP connection:
§Reject§
Press the display key.
The caller hears the busy tone.
Please note
You can also replace the receiver to end
the current call and lift the receiver again
to accept the second call.
page
64) or speak to
Making calls using network services
Consultation calls (external)
You can call a second external caller. The first
call is placed on hold.
During an external call:
§Ext.Call§
Press the display key.
The previous call is placed on
hold. The caller hears an
announcement or music on
hold.
~
Enter the second participant's
telephone number.
The phone number is dialled. You are con-
nected to the second participant.
If the participant does not answer, select the
§End§
display key
to return to the first partici-
pant.
The consultation call is established via the
same send connection as the first call.
Please note
You can also select the second partici-
pant's phone number from the directory
(page
74), redial list or a call list
(page
67).
Ending a consultation call
¢
§Options§
End Active Call
You are reconnected to the first call partici-
pant.
If you have established the consultation call
via your fixed line connection, you can also
end the consultation call by replacing the
receiver. The connection is briefly inter-
rupted and you will receive a call back. As
soon as the receiver is lifted, you are recon-
nected to the first call participant.
This only applies to ISDN and VoIP connec-
tions if Transfer Call by On-Hook is not acti-
¢
vated (ISDN: "ECT"
fer Call by On-Hook"
page
61; VoIP: "Trans-
¢
Web configurator).
63
Advertisement
Table of Contents
