Running The Remote Desktop Software - Fujitsu PRIMERGY TX100 S3 Core Edition Operating Manual

6.3.3.2

Running the Remote Desktop software

Ê On your client computer, click Start, point to All Programs, and then point to
Accessories.
Ê In the Accessories menu, point to Communications, and then click Remote
Desktop Connection.
I
If the Remote Desktop Connection shortcut is not listed in the start menu
at the specified location, proceed as follows:
Ê On your client computer, click Start, point to Run, and then type
mstsc in the Open box.
Ê Click OK.
The Remote Desktop Connection window will open.
Ê In the Computer box, type the default IP address or the default computer
name of your PRIMERGY TX100 S3 Core Edition server.
Ê Click Connect.
Ê Click on the Administrator icon, type the default password of the Headless
server into the password field, and press [Enter] to log into the preinstalled
operating system.
Default user name:
Default password:
You will be taken to the Initial Configuration Tasks pane.
TX100 S3 Core Edition
Administrator
TX100preinstalled
Operating Manual
Starting up and operation
51