Fujitsu PRIMERGY TX100 S3 Core Edition Operating Manual page 50

Starting up and operation
In this case, connect the client to your server by its default name:
Default computer name:
– Connect by IP address
If DHCP is not available on your network or if your server is directly
connected to the client computer the following default network settings
are applied:
Default IP address:
Default subnet mask:
Default gateway:
Ê Configure your client's static IP address on subnet 192.168.10.x with
subnet mask 255.255.255.0.
Example: 192.168.10.20
Subnet mask: 255.255.255.0
For further details on how to configure network settings, refer to
section
V
– It is highly recommended to take note of the original
– Ensure that the IP address is not your server's default
I
The subnet mask is used by the TCP/IP protocol to determine
whether a host is on the local subnet or on a remote network.
50
HEADLESS
192.168.10.10
255.255.255.0
192.168.10.1
"Network configuration (optional)" on page
network setting values (e.g. IP address, subnet mask,
default gateway) before altering the network configuration.
address (192.168.10.10) and is not otherwise in use on the
network.
Operating Manual
53.
TX100 S3 Core Edition