Operating System Recovery - Fujitsu PRIMERGY TX100 S3 Core Edition Operating Manual

6.5.1

Operating system recovery

Ê Establish a VNC connection as described in section
using a VNC connection" on page
Figure 21: Maintenance and Recovery Manager user interface - operating system recovery
Ê Ensure that the Maintenance & Recovery DVD is in your DVD drive!
Ê If the default RAID or HDD configuration has been altered, please ensure
that the system meets the minimum requirements for operating system
recovery:
– a RAID 1 volume consisting of two hard disk drives
– two partitions on Disk 0 with the following capacities:
– Primary partition: at least 50 GB
– Recovery partition: at least 300 MB
For Japanese market:
– Primary partition: at least 32 GB
– Recovery partition: at least 300 MB
TX100 S3 Core Edition
61.
Operating Manual
Starting up and operation
"Accessing the server
71