Installation Steps, Overview - Fujitsu PRIMERGY TX100 S3 Core Edition Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server.
Links take you to sections where you can find more detailed information about
the respective steps:
Ê First of all, it is essential that you familiarize yourself with the safety
information in chapter
Ê Transport the server to the place where you want to set it up.
Ê Unpack all parts, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that all necessary manuals (see
page 12) are available; print out the PDF files if required.
Ê Components that have been ordered additionally may be delivered loose
with the server. Install these in the server as described in the supplied
documentation.
Ê Set up the server (see section
Ê Wire the server. Follow the instructions in sections
the server" on page 40
page 42.
Ê Connect the server to the mains (see section
mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server (see section
Ê Configure your server as described in section
TX100 S3 Core Edition
"Important information" on page
"Unpacking the server" on page
"Setting up the server" on page
and "Notes on connecting / disconnecting cables" on
41).
"Control elements and indicators" on page
Operating Manual
25.
38).
"Documentation overview" on
"Connecting devices to
"Connecting the server to the
"Initial operation" on page
39).
44).
48.
23