Replacing The Cover - IBM IntelliStation M Pro 6220 User Manual

4. Thread the cable through the rope clip and around an object that is not part of
5. If you have other options to install or remove, do so now; otherwise, replace the
6. Reconnect the external cables and power cords. Turn on the attached devices,

Replacing the cover

If you removed the support bracket, reinstall it before you replace the cover. See
"Removing and installing the support bracket" on page 54.
Complete the following steps to replace the cover:
1. Make sure that all cables, adapters, and other components are installed and
2. Install the cover by placing it over the chassis and pivoting it down over the
48
IBM IntelliStation M Pro Types 6220 and 6230: User's Guide
or permanently secured to the building structure or foundation and from which
the cable cannot be removed. Fasten the cable ends together with a lock. After
you add the security cable, make sure that it does not interfere with other
cables connected to the computer.
Rope clip
cover.
and turn on the computer.
seated correctly and that you have removed all work tools from inside the
computer.
computer until it snaps into place.