Standard Settings Pict.sound; Call Timer Overview; Select Picture Format; Move Picture Up/Down - Loewe XELOS A 42 Operating Instructions Manual

Modes of operation – TV
Standard settings picture and sound (for DVB-T stations in UK: call menu
"Additional functions")
Call personal settings/factory settings for picture and
sound, save picture and sound settings as personal
settings.
Standard settings
Call up personal settings
Activate
OK

Call timer overview

If timer recordings have been programmed, you will see
when which station is recorded here.
Timer overview
12.09. 18:00-18:30 3SAT Die Köchin, die Putzfrau und d
Detail
TEXT

Select picture format

The TV set sets the best picture format automatically
when Auto format is switched on. If you want to set a
different format, press this button until the desired format
is selected or select the format with
Picture format
16:9

Move picture up/down

To make picture subtitles visible, you can use
move the picture up or down with the picture formats
OK
"Panorama", "Cinema" and "Zoom".
Note: for DVB-T stations in UK you can switch back and forth quickly
between two stations using this button

TV menu

Call up the TV menu
TV menu
Picture
Picture adjustment
You will find a description of the picture and sound settings on page 20.
The TV menu offers other options for recording, connections and settings
of the TV set.
22
Call up factory settings
OK
Fri 12.09./14:12
New recording Change
Delete
.
4:3 Panorama
Cinema Zoom
Sound Recording Connections
...
For a recorder that is logged in, you can find the following menus in the
"Recording wizard":
Recording wizard - to programme new timer recordings
• Via EPG (not for DVB-T in UK) • Via (analogue) teletext (VPS) • Manual
You will find further information about timer recording on page 33.
Timer list
END
INFO
Here you will find a list of channels programmed for recording. You
Store as pers
can change the recording data or delete programmed recordings and
programme new recordings.
Pre-record time and post record time
For recordings without VPS/PDC, set a lead and lag time here so that the
programme is fully recorded despite any slight differences in the time.
Under "Connections" you will find the following functions:
New devices/modifications (connection wizard)
The connection wizard helps you connect and log in additional equipment
such as video recorders, DVD players/recorders, camcorders/digital
cameras, pay TV decoders, equipment with component signals and digital
END
HDMI/DVI signals.
INFO
Antenna DVB (only for sets with DVB)
•Antenna DVB-T •Satellite DVB-S
You can find more information on pages 14 and 15.
Digital Link Plus
Transmission of the programme data from the TV set to the video/DVD
recorder if a recorder with Digital Link Plus is connected.
Miscellaneous (connections)
• Set AV standard for the connections manually (if it is not recognised
automatically).
to
• "Assign audio digital signals" to one of the AV sockets.
• "Allow switching voltage" to display the signals of the connected device
immediately on the screen via Euro AV during playback.
• RGB insertions at AV2 to play back RGB signals at all station storage
locations.
• Select decoder stations and set sound encoding.
Under "Settings" you will find the following functions:
Stations
Here you can search for and store new stations automatically or manually.
INFO END
With "Change stations", you can rearrange and delete the stations and
Settings
change station names (not for DVB-T stations in UK).
• Search wizard
Parental lock
You can lock the TV from "now" or daily for a certain period of time.
• Manual adjustment • Change stations