Connect Loewe Dvd Preceiver Auro 2216 Ps; Connecting Loewe Dvd Preceiver Auro 2216 Ps And Tremo Loudspeaker System - Loewe XELOS A 42 Operating Instructions Manual

Operating additional equipment
Connecting Loewe DVD Preceiver Auro 2216
PS and Tremo loudspeaker system
You can play audio signals from the TV or DVD player in cinema quality
with these components. The Tremo system includes 5 speakers for the
front, centre and surround reproduction in addition to the subwoofer
illustrated below. The centre signal can be reproduced alternatively by the
TV speakers.
Connect the cubic socket on the DVD Preceiver to the "Master" cubic
socket on the subwoofer. Use the cubic plug cable enclosed with the DVD
Preceiver. Plug the white plug (without kink protection) into the cubic
socket on the subwoofer. For TV as a centre loudspeaker, connect "AUDIO
IN C" on the TV set to "PRE OUT C"on the DVD Preceiver using a cinch
cable. Connect the digital audio output of the TV set "AUDIO DIGITAL
Loewe LCD-TV
AV2-SCART
CENTER
DIGITAL OUT
Auro
PREOUT AUX1 IN AUX OUT AUX 2
L C R L L
DIGITAL
IN
DIGITAL
OUT
SL LFE SR R R
OUT" to the "DIGITAL IN" input of the Preceiver using a cinch cable.
Connect the TV socket "SERVICE" to the TV-L-Link socket on the Preceiver
using the L-Link cable (provided with the Preceiver). Switch on the TV set
and the Preceiver. Via the L-Link, the TV recognises whether the Preceiver is
connected.
Select the "Tremo" loudspeaker system in the DVD menu of the Preceiver,
set the listener/speaker distances and adjust the speaker levels. Please
consult the Preceiver manual.
If you want to listen to the sound via the TV speakers temporarily, call the
Sound menu, select "Sound via" and then "TV". If you want to listen to the
sound via the Loewe Auro system, select "AURO" under "Sound via".
SERVICE
TO TV
TV EXT
12V / 15mA
L-LINK
Tremo
ON
Power OUT
R
Surr.
OFF
L
R
Front C
Bass Intensity
L
Min. Max.
Center to
Phase
Line IN
Sat TV
Right Subw. Left 0 180
Surr.
Slave
Front
Right Center Left
System connector
230V~50/60Hz
Master
35