Adjusting Hue, Panel Illimination - Furuno 1823C-BB Operator's Manual

1. OPERATIONAL OVERVIEW
1.4 Adjusting Hue, Panel Illumination
You may select the colors for the radar, plotter and overlay displays, and adjust
the panel illumination as below.
1. Press the [POWER/TX] key momentarily. A set of soft keys appears.
3nm
12/
LP
H-UP
Radar Display
2. Press the C:HUE soft key to show the hue setting window.
3. Operate the trackball to select hue desired, referring to the table below.
MANUAL SET follows the color settings on the CHART DETAILS menu for
the plotter and the RADAR DISPLAY SETUP menu for the radar.
Characters
Radar ring
Radar echo
Background
Landmass (plotter) Light-Yellow
Note that colors are slightly different depending on monitor characteristics.
Note: When using the overlay screen, the own ship track will be hidden if the
radar background and own ship track are blue and the "MANUAL SET"
hue setting is used. In this case, set HUE to other position and then return
to "MANUAL" to show the own ship track in black.
1-6
319. 9 °
BRILL
M
CONTST
PANEL
B
BRILL
C HUE
RADAR
D
STBY
E RETURN
359.9 ˚R
+
11.70
nm
(Blank label of softkey is not used)
HUE
¡
¡
¡
¤
Night
Radar: Red
Plotter: White
Red
Orange
Black
34° 22. 3456'N
080° 22. 3456'E
16.0nm
WP-002
FISH
Plotter Display
DAY
NIGHT
TWILIGHT
MANUAL SET
Hue window
Day
Black Radar: Green
Plotter: Black
Green* Green*
Red Yellow
White Blue
Yellow Light-Yellow
offered by Busse-Yachtshop.de
359.9°M TRIP NU BRILL
CONTST
19.9 kt 99.9 nm
PANEL
B
BRILL
C HUE
RADAR
D
STBY
BRIDGE
E RETURN
(Blank label of softkey is not used)
Twilight
* = Red on
C-MAP display.