Adjusting Display Brilliance, Panel Dimmer; Menu Overview - Furuno FR-8062 Operator's Manual

1.4

Adjusting Display Brilliance, Panel Dimmer

The display brilliance and panel dimmer may be adjusted as follows:
1. Press the POWER/BRILL key momentarily to show the Brill/Panel dialog box.
Brill/Panel
Min Max
Brill (1 - 15) 15
Panel (1 - 15) 15
[ENTER]: Select
[CANCEL/HL OFF]: Close
Brill/Panel dialog box
2. Press the ENTER key to choose Brill or Panel, whichever you wish to adjust.
3. Roll the trackball rightward or leftward to adjust. (For brilliance, you may also use the POWER/
BRILL key.)
4. Press the CANCEL/HL OFF key to close the window.
1.5

Menu Overview

Less-often used functions are controlled through the menu, which consists of 15 menus and 5 sub
menus. Below is the basic procedure for menu operation.
1. Press the MENU key to display the menu.
Menu
4
Title bar*
Menu
Brill/Color
Display
4
Cursor*
Echo
Target Trails
Mark
Custom 1
Custom 2
Custom 3
Tuning
GPS Buoy
Target
ARP*
AIS*
GPS*
Arrow means
sub menus
present
1
Displayed if equipped with ARP Board.
*
2
Displayed if radar is interfaced with AIS transponder.
*
3
Dipslayed if radar is interfaced with GPS receiver.
*
4
Title bar is currently controllable column is blue; selected cursor is
*
yellow. Title bar of inactive column is gray.
2. Roll the trackball to choose a menu or sub menu. As you roll the trackball, the yellow (highlight)
cursor in the Menu column indicates the menu currently selected and the menu items change
according to the menu selected.
Currently selected menu
Echo
Auto Gain
Auto Sea
Auto Rain
Pulse Length
Echo Stretch
Echo Average
Noise Rejector
Interference Rejector
Auto Anti Clutter
Display-Dynamic
Display-Curve
Antenna Speed
1
2nd Echo Rejector
2
3
[ENTER]: Enter [CANCEL/HL OFF]: Back
System [MENU]: Exit
Scroll bar
(Indicates menus not currently shown in menu window.
Black vertical line indicates location in menu.)
:Moderate
:Moderate
:Moderate
:Long
:Off
:Off
:Off
:Med
:Off
:Normal
:2
:48rpm
:Off
Menu
1. OPERATIONAL OVERVIEW
Menu items
and current
settings
1-5