Anchor Watch Alarm - Furuno 1823C-BB Operator's Manual

3. PLOTTER OPERATION
3.11.3

Anchor watch alarm

The anchor watch alarm informs you that your boat is moving when it should be
at rest. When the anchor watch is active, a red dashed circle with an "X" at its
center marks the anchor watch area.
1. Press the [ALARM] key to open the alarm menu.
2. Use the trackball to select ANCHOR WATCH ALARM.
3. Press the A:EDIT soft key to open the anchor alarm window.
4. Use the trackball to select ON.
5. Use the trackball and the alphanumeric keys to enter alarm setting: Operate
the trackball to select digit; use the alphanumeric keys to enter value. The
available anchor watch setting is 0.001 to 9.999 miles.
6. Press the C:ENTER soft key or push the [ENTER] knob to register setting.
7. Press the [ALARM] key to finish.
Note: If the arrival alarm range is changed, turn off the anchor watch alarm and
then turn it on again to give priority to the anchor watch alarm.
3-54
Alarm
setting
Your ship's position where
you start the anchor watch
alarm.
How the anchor watch alarm works
ANCHOR WATCH ALARM
¡
ON 0.010nm
¤
OFF
Anchor watch alarm window
offered by Busse-Yachtshop.de
: Alarm
area