Adding A Call Log Entry To A Speed Dial Button - Avaya 4620SW User Manual

Adding a Call Log Entry to a Speed Dial Button

To add a Call Log entry to a Speed Dial button:
1. Access the Call Log Application by pressing the Log softkey.
The telephone displays the Missed Calls Main screen.
2. If the party for whom you want to create a Speed Dial button is listed on the Missed Calls
Log, proceed to Step 3. If the Missed Call Log does not list the party you want, press the
Outgo or InAns softkey for a different Call Log.
The telephone displays the Outgoing or Incoming Answered Call Log Main screen, as
applicable.
3. Press the Line/Feature button to the left of the party for which you want to create a Speed
Dial button.
The telephone displays the Detail screen for that entry. If the AddToSD softkey is not
shown, your Telephone Administrator might have blocked changes to Speed Dial buttons.
Or the maximum number (108) of Speed Dial buttons have labels. In the latter case, you
cannot add a new entry until you remove an existing entry.
4. Press the AddToSD softkey.
The Speed Dial Field Selection screen displays the prompt "Select field to change.".
Note:
For more information on this screen, see
Note:
Adding a Call Log Entry to a Speed Dial Button
Entering Data on Speed Dial
Issue 2.2 August 2005
Screens.
47