Rstp Status - KTI Networks KGD-802 User Manual

4.17 RSTP Status

The following example shows three RSTP topologies operate in three VLANs configured in a
switch.
RSTP Status
VLAN Id
Bridge Id
Hello Time
Max. Age
Fwd Delay
Topology
Root Id
[Refresh]
Description
The VLAN which has STP enabled ports
STP bridge ID [Priority:MAC address] detected in the associated VLAN
Hello Time is used to determine the periodic time to send normal BPDU
from designated ports among bridges. It decides how long a bridge should
send this message to other bridge to tell I am alive.
1 ~ 10 seconds
When the switch is root bridge, the whole LAN uses this setting as the
maximum age time.
6 ~ 40 seconds
This figure is set at Root Bridge only.
Steady - The STP topology is steady.
Changing - The STP topology is changing.
The MAC address of current STP root
If the switch is STP root, a message of [The switch is Root.] is displayed.
Click to refresh the status
-65-