KTI Networks KGD-802 User Manual page 3

The information contained in this document is subject to change without prior notice. Copyright (C). All
Rights Reserved.
TRADEMARKS
Ethernet is a registered trademark of Xerox Corp.
WARNING:
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and if not installed and used in accordance with the
instruction manual may cause harmful interference in which case the user will be required to correct the
interference at his own expense.
NOTICE:
(1) The changes or modifications not expressively approved by the party responsible for compliance
could void the user's authority to operate the equipment.
(2) Shielded interface cables and AC power cord, if any, must be used in order to comply with the
emission limits.
CISPR A COMPLIANCE:
This device complies with EMC directive of the European Community and meets or exceeds the following
technical standard.
EN 55022 - Limits and Methods of Measurement of Radio Interference Characteristics of Information
Technology Equipment. This device complies with CISPR Class A.
WARNING: This is a Class A product. In a domestic environment this product may cause radio interfer-
ence in which case the user may be required to take adequate measures.
CE NOTICE
Marking by the symbol
pean Community. Such marking is indicative that this equipment meets or exceeds the following techni-
cal standards:
EMC Class A
EN61000-6-4/2001 IEC 61000-6-4/1997
EN55011/1998+A1/1999+A2/2002
CISPR11:1997+A1/1999+A2/2002
IEC 61000-3-2/2000
IEC 61000-3-3:1994/A1:2001
EN61000-6-2/2005 IEC 61000-6-2/2005
IEC 61000-4-2:2001
IEC 61000-4-3:2002/A1:2002
IEC 61000-4-4:2004
IEC 61000-4-5:2001
IEC 61000-4-6:1996+A1/2000
IEC 61000-4-8:2001
IEC 61000-4-11:2004
indicates compliance of this equipment to the EMC directive of the Euro-
-3-