802.1X Configuration - KTI Networks KGD-802 User Manual

Aggregations
Port Protocol Enabled
Port Edge
Port Path Cost
[Apply]
[Refresh]

4.10 802.1X Configuration

Enabled to support port trunking in STP. It means a link aggregate is
treated as a physical port in RSTP/STP operation.
Port is enabled to support RSTP/STP.
An Edge Port is a port connected to a device that knows nothing about
STP or RSTP. Usually, the connected device is an end station. Edge Ports
will immediately transit to forwarding state and skip the listening and
learning state because the edge ports cannot create bridging loops in the
network.
Specifies the path cost of the port that switch uses to determine which port
are the forwarding ports the lowest number is forwarding ports, the rage is
1 ~ 200,000,000 and Auto. Auto means a default cost is automatically
calculated in RSTP operation based on the port link speed.
The default costs are :
Link Speed Auto Default Cost
10Mbps 2000000
100Mbps 200000
1000Mbps 20000
Click to apply the configuration change
Click to refresh current configuration
-52-