Port Type - KTI Networks KGD-802 User Manual

Flow Control
Relay Alarm
PoE Enable
[SFP DDM]

[Port Type]

[Apply]
4.5.1 Port Type
Port 7 and Port 8 supports two media types, RJ-45 and SFP. Use this button to select the port type.
Information Function
Port # Port number (Port 7 & Port 8)
Type RJ-45 Use RJ-45.
SFP
Notes:
The available mode options for RJ-45 port type on Port 7 and Port 8 are:
Mode
Auto
10 Half
10 Full
100 Half
100 Full
1000 Full
The available mode options for SFP port type on Port 7 and Port 8 are:
Mode
Auto 1000 Full
Force 1000 Full
Set port flow control function
v - set to enable 802.3x pause flow control for ingress and egress
Set port link down alarm
v - set to enable port link down monitoring for failure relay output
(Refer to section 2.6 for Failure Relay Output function.)
Set port PoE function (Only valid for Port 1 ~ Port 4 on PoE model)
v - set to enable PoE function
Click to display DDM information and status of the SFP transceivers
Click to set port type, RJ-45 or SFP for Port 7 and Port 8
Click to apply the configuration change
Use SFP.
Auto-negotiation
Enable
Disable
Disable
Disable
Disable
Enable
Auto-negotiation
Enable
Disable
Speed capability Duplex capability
10, 100, 1000M
10M
10M
100M
100M
1000M
Speed capability Duplex capability
1000M
1000M
-38-
Full, Half
Half
Full
Half
Full
Full
Full
Full