Installing The Network Card In A Novell Netware Client - Nortel BayStack 22 206380-A Installation And Reference Manual

Installation and Reference for the BayStack 22 PC Card Adapter
Type:
7.
down
The server closes.
Type:
8.
exit
Your system returns to the DOS prompt.
In the DOS prompt, type:
9.
server
The BayStack 22 network card and the server on the Novell NetWare network
open and are functioning.
Note: Each time you reboot your server, you must run the B22ENA10.EXE
program to enable the BayStack 22 network card.

Installing the Network Card in a Novell NetWare Client

This section describes the steps required to install the BayStack 22 network driver
software on your Novell NetWare 4.x laptop computer, or client. You must have
already installed a BayStack 22 PC Card Adapter in your laptop.
To install the BayStack 22 network driver on your Novell NetWare 4.x client:
Verify that your BayStack 22 network card is properly installed in your
1.
Novell NetWare 4.x laptop.
Insert the BayStack 22 PCMCIA Card Adapter Software & Documentation
2.
CD into your laptop.
Access a DOS prompt screen.
3.
From the DOS prompt you must run the BS22ENA10.EXE program before
installing the BayStack 22 network driver.
3-36
206380-A