Table of Contents
Advertisement
Installation and Reference for the BayStack 22 PC Card Adapter
Installing the Network Driver in a Novell NetWare 4.x
Environment
This section describes the steps required to install the BayStack 22 network driver
software in a Novell NetWare version 4.x environment. You must install and
configure the software on your Novell server and client. Your laptop computer is
considered the client.
If you are installing the BayStack 22 network driver software in a Novell NetWare
version 3.12 environment, refer to the Readme.txt file on the BayStack 22
PCMCIA Card Adapter Software & Documentation CD.
Installing the Network Card in a Novell NetWare Server
This section describes the steps required to install the BayStack 22 network driver
software in your Novell NetWare 4.x server.
Your laptop computer must have the following installed prior to installing the
BayStack 22 network driver software:
•
BayStack 22 PC Card Adapter
•
MS-DOS operating system
•
Novell NetWare 4.x server software
To install the BayStack 22 network driver in your Novell NetWare 4.x server:
Insert the BayStack 22 PCMCIA Card Adapter Software & Documentation
1.
CD into the CD drive of your server.
Verify that the following files are located in the Novell NetWare server
2.
directory.
•
•
If the files listed in step 2 are not located in the server directory, copy
3.
these files from the BayStack 22 PCMCIA Card Adapter Software &
Documentation CD.
3-32
\NETWARE\SERVER\4.X\MSM.NLM
\NETWARE\SERVER\ETHERTSM.NLM
206380-A
Advertisement
Table of Contents
