Table of Contents
Advertisement
Select Nortel BayStack 22 10/100 Mbps Fast Ethernet Adapter.
3.
Click Properties.
4.
The BayStack 22 network driver dialog box opens
Figure 3-24.
Select the Advanced tab.
5.
In the Property list, select Connection Type.
6.
In the Value list, select one of the following:
7.
•
•
•
•
206380-A
BayStack 22 Network Driver Dialog Box—Advanced Tab
AutoSense—Select the default AutoSense setting if you want the port to
use the fastest speed supported by the attached device.
10BaseT (Twisted Pair)—Use this setting for 10 Mb/s Ethernet hubs.
100BaseTx—Use this setting for 100 Mb/s Ethernet hubs.
100BaseTx or 10BaseT full duplex—Use these settings for 100 Mb/s and
10 Mb/s Ethernet switches.
Software Installation
(Figure
3-24).
3-19
Advertisement
Table of Contents
