Installing the Network Driver in a Windows NT 4.0
Environment
This section describes the steps required to install the network driver software in a
Windows NT 4.0 environment.
To install the network driver in a laptop computer:
Be sure that the standard network services are installed on the
1.
Windows NT 4.0 laptop.
From the Windows taskbar, choose Start > Settings > Control Panel.
2.
Double-click Network.
3.
The Network dialog box opens. The Identification tab is displayed by default.
Select the Adapters tab
4.
Figure 3-28.
206380-A
(Figure
3-28).
Network Dialog Box—Adapters Tab
Software Installation
3-23