Preinstallation; Installing The Network Driver In A Windows 95 Environment; Figure 3-1. New Hardware Found Window-Generic - Nortel BayStack 22 206380-A Installation And Reference Manual

Installation and Reference for the BayStack 22 PC Card Adapter

Preinstallation

Perform the following tasks prior to installing the BayStack 22 network driver:
• Install the BayStack 22 network card before installing the BayStack 22
network driver.
• Remove all other network cards from the laptop computer. If you have other
network cards or adapters installed in your computer, the driver installation
process will not execute. You do not need to uninstall other network driver
software before you run the installation.
• Be sure to have the Windows 95 or Windows 98 CD and the BayStack 22
network driver CD ready to use during the installation. You may be prompted
to install either CD. You may receive the "Insert Disk" and "Please insert the
disk labeled Windows..." messages. If you receive these messages, insert the
appropriate CD, enter the appropriate drive letter and CD name, and click OK
to continue the installation. For example, if drive D is your CD drive and you
insert the Windows 95 CD, enter d:\win95 when prompted.

Installing the Network Driver in a Windows 95 Environment

This section describes the steps required to install the driver software in a
Windows 95 environment.
To install the driver:
Turn on the power to the computer, and start Windows 95.
1.
A generic New Hardware Found window opens
Figure 3-1.
3-2
New Hardware Found
PCMCIA Ethernet PCMCIA Adapter
Select which driver you want to install for your new hardware:
New Hardware Found Window—Generic
(Figure 3-1).
9561DA
206380-A