Accessing Mis Server Settings After Installation; Viewing Or Changing The Mis Server Configuration; Verifying That The Mis Server Is Running; Accessing Windows Nt Service Settings - Panasonic DBS-576 Reference Manual

Section 525 - ACD/MIS Reference
Accessing MIS Server Settings After
Installation

Viewing or Changing the MIS Server Configuration

•

Verifying that the MIS Server is Running

1. Click the Windows NT Start button, and then select Settings >
2. Click the Version/Trace tab. The Service Status box displays "Running"
Viewing or Changing the MIS Server Configuration
1. Click the Windows NT Start button, and then select Settings >
2. Double-click on the MIS Server Configuration icon. The

Accessing Windows NT Service Settings

The MIS Server application installs and runs as a Service in the Windows
NT environment. A Windows NT Service can be started automatically
before a user logs into the Windows NT PC. This allows the MIS Server
application to start automatically after a power failure, it also eliminates the
need for someone to remember to start the MIS Server application.
1. Click the Windows NT Start button, and then select Settings >
2. Double-click on the Services icon.
576/HD-50-525
Click the Windows NT Start button, and then select Settings > Control
Panel. The MIS Server Configuration dialog box appears.
Click the appropriate tab and make the appropriate changes.
Control Panel. The MIS Server Configuration dialog box appears.
or "Stopped".
Note: The trace function is used to gather diagnostic information when
trouble shooting. There is no need to run the Trace function.
Control Panel.
MIS Configuration dialog box appears.
View the settings or make the appropriate changes.
Control Panel.
For more information about Windows NT Services, select the Help
button.
DBS 576/HD issued September 2001
Chapter 3. Installation
3-7