Shortcut Settings; Adding Shortcuts - Brother DCP-J4110DW Basic User's Manual

Chapter 1

Shortcut Settings

You can add the copy and scan settings you
use most frequently by setting them as your
Shortcuts. Later you can recall and apply
these settings quickly and easily. You can
add three Shortcuts.
The following settings can be included in a
copy or scan Shortcut:
Copy

Quality

Paper Type

Paper Size

Enlarge/Reduce

Density

Stack/Sort

Page Layout

2-sided Copy

Advanced Settings
Scan (Scan to Media)

Scan Type

Resolution

File Type

File Name

Remove Background
Scan (Scan to Network)
Scan (Scan to FTP)
8

Adding Shortcuts

1
a
Press
b
Press s or t on the Touchpanel to
display Shortcut Settings.
Press Shortcut Settings.
c
Press ,
added a Shortcut.
NOTE
-Blank- will appear as the name of
available Shortcuts.
d
Read the information on the
Touchscreen, and then press Next to
display the modes Copy and Scan.
e
Press Copy or Scan for the mode of
your new Shortcut.
If you press Scan, press s or t to
display Scan to Media,
Scan to Network or Scan to FTP,
and then press the type of scan you
want to set.
Do one of the following:
 If you press Scan to Media, go to
step f.
 If you press Scan to Network or
Scan to FTP, press s or t to
display the Profile Name, and then
press it. Go to step i.
f
Press s or t to display the available
settings for the mode you chose in
step e, and then press the setting you
want to change.
g
Press s or t to display the available
options for the setting, and then press
the new option you want to set.
Repeat steps f and g until you have
chosen all the settings for this Shortcut.
h
When you have finished choosing
settings, press OK.
(Settings).
or where you have not
1