Brother DCP-J4110DW Quick Setup Manual
  1. Manuals
  2. Brands
  3. Brother Manuals
  4. All in One Printer
  5. DCP-J4110DW
  6. Quick setup manual

Brother DCP-J4110DW Quick Setup Manual

Hide thumbs Also See for DCP-J4110DW:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Setup Guide
Start Here
Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup
Guide for the correct setup and installation.
WARNING
CAUTION
IMPORTANT
NOTE
1
Unpack the machine and check the components
The components included in the box may differ depending on your country.
Basic User's Guide
WARNING
Plastic bags are used in the packing of your machine. To avoid the danger of suffocation, keep these
plastic bags away from babies and children. Plastic bags are not toys.
NOTE
• Save all packing materials and the box in case for any reason you must ship your machine.
• You need to purchase the correct interface cable for the interface you want to use (for USB or network
connection).
USB cable
It is recommended to use a USB 2.0 cable (Type A/B) that is no more than 2 metres long.
Network cable
Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast
Ethernet Network.
a
Remove the protective tape and film covering the machine, and also from the Touchscreen.
b
Make sure you have all the components.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injuries.
CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injuries.
IMPORTANT indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.
Notes tell you how you should respond to a situation that may arise or give tips about how the
operation works with other features.
Introductory Ink
Cartridges
Product Safety Guide
DCP-J4110DW
Black
Yellow
Cyan
Magenta
(Approx. 65% yield of
the replacement
cartridge) uuBasic
User's Guide:
Consumable items
CD-ROM
Quick Setup Guide
Power Cord
UK/IRE/GEN Version 0
1

Advertisement

Table of Contents
loading

Related Manuals for Brother DCP-J4110DW

Summary of Contents for Brother DCP-J4110DW

  • Page 1 Quick Setup Guide Start Here DCP-J4110DW Please read the Product Safety Guide first before you set up your machine. Then, please read this Quick Setup Guide for the correct setup and installation. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death WARNING or serious injuries.
  • Page 2 Gently press and slide the paper guides a to fit Load plain A4 paper the paper size. Make sure that the triangular mark b on the paper guide a lines up with the mark for the paper size you are using. CAUTION DO NOT carry the machine by holding the scanner cover, the Jam Clear Cover, the manual feed slot...
  • Page 3 Gently put the paper into the paper tray print Slowly push the paper tray completely into the side down and top edge first. machine. IMPORTANT Be careful that you do not push the paper in too far; it may lift at the back of the tray and cause paper feed problems.

  • Page 4: Connect The Power Cord

    Connect the power cord Install the ink cartridges WARNING CAUTION The machine must be fitted with an earthed If ink gets in your eyes, wash it out with water at plug. once and call a doctor if you are concerned. IMPORTANT NOTE DO NOT connect the USB cable yet (if you are...
  • Page 5 Remove the orange protective part a. Take care to match the sticker colour a with the cartridge colour b as shown in the diagram below. Install each ink cartridge in the direction of the arrow on the label. NOTE Do not throw away the orange protective part. You will need it if you transport the machine.

  • Page 6: Check The Print Quality

    Press Date & Time. Check the print quality Enter the last two digits of the year on the Touchscreen, and then press OK. To move the cursor to the left, press re-enter the number. When the preparation process has finished, the Touchscreen shows Set Paper and Press Start.
  • Page 7 • If your computer does not have a CD-ROM drive you can download the latest drivers, manuals and utilities for your model from the Brother Solutions Center at http://solutions.brother.com/. Some software applications included on the CD-ROM may not be available as a download.

  • Page 8: For Usb Interface Users

    • For Windows Vista and Windows 7, when the User Account Control screen appears click Continue or Yes. • If the Brother screen does not appear automatically, go to My Computer or Computer then double-click the CD-ROM icon and double-click start.exe.

  • Page 9: Connect The Usb Cable

    ® Windows Carefully guide the USB cable into the cable Connect the USB cable channel and out the back of the machine. Connect the cable to your computer. Lift the scanner cover until it locks securely into the open position. IMPORTANT Make sure that the cable does not restrict the cover from closing, or an error may occur.
  • Page 10 When the On-Line Registration screen is you want and click OK. displayed, follow the on-screen instructions. • When the Brother Product Research and Click Next. Support Program screen appears, select If you do not want to set your machine as the...
  • Page 11 Macintosh For USB interface users (Mac OS X v10.5.8, 10.6.x, 10.7.x) Connect the USB cable to the USB port Before you install marked with a symbol a. You will find the USB port inside the machine on the right, as shown in the callout below.
  • Page 12 The installation of MFL-Pro Suite is now click Next. Follow the on-screen instructions. complete. Go to step 13. Please wait for the software to install. After the installation, the Brother software will search for the Brother device. This will take a few moments to complete.
  • Page 13 Macintosh Download and install Presto! PageManager When Presto! PageManager is installed, OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. On the Brother Support screen, click the Presto! PageManager to go to the Presto! PageManager download site, and follow the on-screen instructions.

  • Page 14: Wired Network

    Wired Network ® Windows For wired network interface users ® ® ® (Windows XP Home/XP Professional/Windows Vista /Windows Before you install Connect the network cable Make sure that your computer is ON and you are Lift the scanner cover until it locks securely into logged on with Administrator rights.
  • Page 15 User Account Control screen appears click Continue or Yes. IMPORTANT • If the Brother screen does not appear Make sure that the cable does not restrict the automatically, go to My Computer or cover from closing, or an error may occur.
  • Page 16 Firewall is off, this screen may appear. Confirm your settings by following the on-screen instructions. The installation of the Brother drivers will automatically start. The installation screens appear one after another. See the instructions provided with your firewall software for information on how to add the IMPORTANT following network ports.
  • Page 17 2 PCs with Nuance™ PaperPort™ 12SE installed, please purchase the NOTE Brother NL-5 pack which is a multiple PC license • If an error message appears during the agreement pack for up to 5 additional users. To...

  • Page 18: For Wired Network Interface Users

    Wired Network Macintosh For wired network interface users (Mac OS X v10.5.8, 10.6.x, 10.7.x) Before you install Connect the network cable Make sure your machine is connected to the power Lift the scanner cover until it locks securely into and your Macintosh is ON. You must be logged on the open position.
  • Page 19 Please wait for the software to install. After the installation, the Brother software will search for the Brother device. This will take a few moments to complete. If the machine is configured for your network, choose your machine from the list, and then...
  • Page 20 Wired Network Macintosh When this screen appears, click Add Printer. NOTE • If your machine is not found over the network, confirm your network settings. • You can find your machine’s MAC Address (Ethernet Address) and IP Address by printing out the Network Configuration Report.
  • Page 21 Macintosh Download and install Presto! PageManager When Presto! PageManager is installed, OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. On the Brother Support screen, click the Presto! PageManager to go to the Presto! PageManager download site, and follow the on-screen instructions.

  • Page 22: For Wireless Network Users

    Ethernet for a faster data transfer or USB for the fastest throughput speed. Although your Brother machine can be used in both a wired and wireless network, only one of the connection methods can be used at a time.
  • Page 23 For Wireless Network Users Choose your wireless setup method The following instructions offer three methods for setting up your Brother machine on a wireless network. Choose the method you prefer for your environment. ® Setup using the installation CD-ROM and a USB cable (Windows and Macintosh) You need to temporarily use a USB cable during configuration (cable not included).
  • Page 24 If your wireless access point/router does not support WPS (Wi-Fi Protected Setup™) or AOSS™, write down the wireless network settings of your wireless access point/router in the area below. Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings.
  • Page 25 ® ® Windows Firewall or the Windows Firewall is • If the Brother screen does not appear off, this screen may appear. automatically, go to My Computer or Computer then double-click the CD-ROM icon and double-click start.exe. The CD-ROM Top menu will appear.
  • Page 26 For Wireless Network Users Choose Yes, I have a USB cable to use for When the following screen appears, check Yes installation. and then click Next. if you want to connect to the listed SSID. Click Next and go to j. Temporarily connect the USB cable (not When the following screen appears, the wizard included) directly to the computer and the...
  • Page 27 For Wireless Network Users Enter the Network Key you wrote down in Disconnect the USB cable between the step 11-a on page 23, and then click Next. computer and the machine. Click Next to continue to install MFL-Pro Suite. NOTE If your network is not configured for Wireless setup is now complete.
  • Page 28 Press Yes to connect your machine using your model’s home page of the Brother Solutions WPS. (If you choose No to continue manual configuration, go to d to enter a Network Key.) Center at http://solutions.brother.com/.
  • Page 29 The Wi-Fi LED on the control panel Place the Brother machine within range of your lights up, indicating that the machine’s WPS or AOSS™ access point/router. The Network I/F is set to WLAN.

  • Page 30: Troubleshooting

    For Wireless Network Users Troubleshooting Please do not contact Brother Customer Service for assistance without the wireless security information. We cannot assist you in locating your network security settings. How can I find the wireless security information (SSID and Network Key) 1) You should see the documentation provided with your wireless access point/router.
  • Page 31 The security information (SSID/Network Key) is incorrect. Reconfirm the SSID and security information (Network Key). If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother TS-05 machine supports the use of the first WEP key only.

  • Page 32: Wireless Network

    • For Windows Vista and Windows 7, when the User Account Control screen appears click Continue or Yes. • If the Brother screen does not appear automatically, go to My Computer or Computer then double-click the CD-ROM icon and double-click start.exe.
  • Page 33 Wireless Network ® Windows When this screen appears, choose Change The installation of the Brother drivers will the Firewall port settings to enable network automatically start. The installation screens connection and continue with the appear one after another. installation. (Recommended) and click Next.
  • Page 34 12SE on up to 2 PCs on the network. If you want to use more than 2 PCs with Nuance™ PaperPort™ 12SE installed, please purchase the Brother NL-5 pack which is a multiple PC license NOTE agreement pack for up to 5 additional users. To •...
  • Page 35 Wireless Network Macintosh Install the drivers & software (Mac OS X v10.5.8, 10.6.x, 10.7.x) Choose your machine from the list, and then Before you install click Next. Make sure your machine is connected to the power and your Macintosh is ON. You must be logged on with Administrator rights.
  • Page 36 Wireless Network Macintosh The installation of the Brother drivers will When this screen appears, click Add Printer. automatically start. Please wait for the software to install. NOTE • You can find your machine’s MAC Address (Ethernet Address) and IP Address by printing out the Network Configuration Report.
  • Page 37 Macintosh Download and install Presto! PageManager When Presto! PageManager is installed, OCR capability is added to Brother ControlCenter2. You can easily scan, share and organize photos and documents using Presto! PageManager. On the Brother Support screen, click the Presto! PageManager to go to the Presto! PageManager download site, and follow the on-screen instructions.

  • Page 38: Install Optional Applications

    Install Optional Applications ® Windows Install optional Install FaceFilter Studio applications Help FaceFilter Studio and BookScan & To get instructions on how to use FaceFilter Studio, Whiteboard Suite supported by download and install FaceFilter Studio Help. Reallusion, Inc To run FaceFilter Studio, go to FaceFilter Studio is an easy-to-use borderless photo printing application.

  • Page 39: For Network Users

    For Network Users Reset the network settings to factory default To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below. Make sure the machine is idle, then disconnect all the cables from the machine (except the power cord). Press Settings.

  • Page 40: Replacement Consumables

    The contents of this manual and the specifications of this product are subject to change without notice. Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited to typographical and other errors relating to the publication.

Table of Contents