Section 3 - Configuration
Advanced Wireless
These options are for users who wish to change the performance of their 802.11g wireless radio from the standard settings. D-Link does not
recommend changing the factory default settings. Incorrect settings may impair the performance of your wireless radio. The default settings should
provide the best wireless radio performance in most environments.
ADVANCED WIRELESS SETTINGS
If you need to change the default behavior, please set the following
values:
Select from 20 MHz Auto 20/40 MHz on the Channel Width.
Select Lower or Upper on the Control Sideband.
Select MCS.
Please type the Fragmentation Threshold value.
Please type the RTS Threshold value.
Please type the DTIM Interval value.
Please type the Beacon Interval value.
D-Link DSL-2740R
51