Section 3 - Configuration
For PPPoE/PPPoA connection
Type the Username and Password (and PPPoE Service Name, if required by
your ISP).
Type the service name from your ISP in Servername.
Choose PPPoE LLC/Snap-Bridging, PPPoE VC-mux, PPPoA LLC/
encapsulation or PPPoA VC-mux in Connection Type.
Type the MTU value which you want (it should be less than 1492) in MTU.
Set the time for which if your data doesn't pass through the connection, it
will be disconnected in Idle Time Out. The default time is 0 and it means it
is always on.
DNS AND DEFAULT GATEWAY
Select Obtain DNS server address automatically to get DNS from your ISP.
Or
Select Use the following DNS server addresses to type the DNS IPs in the
Preferred DNS server and Alternate DNS server.
D-Link DSL-2740R
27