Time - D-Link DSL-2740R User Manual

Section 3 - Configuration

Time

The TIME configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this section you
can set the time zone that you are in and set the NTP (Network Time Protocol) Server. Daylight Saving can also be configured to automatically
adjust the time when needed.
To access the TIME setting window, click on the Time and Date button in the SETUP directory.
TIME
Check Enable NTP Server.
Select specific time server to use from the NTP Server Used drop-
down menu. Or, you can type the specific NTP server name.
Select your operating time zone from the Time Zone drop-down menu.
If you need to enable daylight saving time, just select Enable Daylight
Saving. Daylight saving is a period from late Spring to early Fall.
Set how many hours to change the time for Daylight saving Offset.
Configure Daylight Saving Dates
Daylight Saving time starts in the most parts of the United States on
the second Sunday of March. Each time zone in the United States
starts Daylight Saving time at 2 A.M. Thus, in the United States, you
should use March, Second, Sunday, at 2:00 A.M for the start time.
Daylight Saving time starts in the European Union on the last Sunday
of March. Thus, in the European Union, you must select March, Last,
Sunday for the start time. The time must depend on your country's time
zone. For example, in Germany you must type 2 because Germany's
time zone is 1 hour ahead of GMT or UTC (GMT+1). Thus, in Germany
you should use March, Last, Sunday, at 1:00 A.M for the start time.
D-Link DSL-2740R 40