D-Link DSL-2740R User Manual page 72

Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 - Click on Start > Control Panel > Network Connections.
Windows® Vista - Click on Start > Control Panel > Network Connections.
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click on My Network Places > Properties.
Step 2
Right-click on Local Area Connection which represents your D-Link network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click on Properties.
Step 4
Click on Use the following IP address and enter an IP address that is on the
same subnet as your network or the LAN IP address on your router.
Example: If the router's LAN IP address is 192.168.0.1, make your IP address 192.168.0.X
where X is a number between 2 and 99. Make sure that the number you choose is
not in use on the network. Set the Default Gateway the same as the LAN IP address
of your router (192.168.0.1).
Set the Primary DNS the same as the LAN IP address of your router
(192.168.0.1). The Secondary DNS is not needed or you may enter a
DNS server from your ISP.
Step 5
Click on OK twice to save your settings.
D-Link DSL-2740R 72