D-Link DSL-2740R User Manual page 33

Section 3 - Configuration
Add Wireless Device with WPS (WI-FI PROTECTED SETUP) Wizard
It will show the wireless login information. You can check if it is
correct, then click Next.
Manual WIRELESS Connection Setup SETTINGS
Clicking on Manual Wireless Connection Setup on the Wireless Setup
page will take you to the Manual Wireless Connection Setup page.
Click on Enable Wireless to allow the router to
operate in the wireless environment.
The SSID identifies members of the Service Set. Accept the default name
or change it to something else. If the default SSID is changed, all other
devices on the wireless network must also use the same SSID.
The Wireless Channel can let you select the channel of your access point.
Channel availability is different for different countries due to their regulations.
Select 802.11 Mode to operate in b/g/n mode.
Or select specified mode to use 802.11b only, 802.11g only, or 802.11n only.
Choosing Mixed 802.11g and 802.11b enables the DSL-2740R to detect clients and
use 802.11g or 802.11b to synchronize.
Choosing Mixed 802.11n, 802.11g and 802.11b enables the DSL-2740R to detect
clients and use 802.11n, 802.11g or 802.11b to synchronize.
D-Link DSL-2740R 33