D-Link xStack Reference Manual page 1086

Dgs-3120 series layer 3 managed gigabit switch
Hide thumbs Also See for xStack:
Table of Contents

Advertisement

®
xStack
DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
Incompatible LLDP-MED
TLV set detected
Surveillance
When a new surveillance
VLAN
device is detected in the
port
When a port which is
enabled surveillance
VLAN joins the
surveillance VLAN
automatically.
When a port leaves the
surveillance VLAN and at
the same time, no
surveillance device is
detected in the aging
interval for that port, the
log message will be sent.
OSPFv2
OSPF interface link state
changed.
OSPF interface
administrator state
changed.
One OSPF interface
changed from one area to
another.
One OSPF neighbor state
changed from Loading to
Full.
One OSPF neighbor state
changed from Full to
Down.
One OSPF neighbor
state's dead timer expired.
One OSPF virtual
neighbor state changed
from Loading to Full.
One OSPF virtual
neighbor state changed
from Full to Down.
OSPF router ID was
changed.
Enable OSPF.
Disable OSPF.
VRRP
One virtual router state
becomes Master.
One virtual router state
becomes Backup.
One virtual router state
becomes Init.
Authentication type
mismatch of one received
VRRP advertisement
message.
Authentication checking
fail of one received VRRP
advertisement message.
Checksum error of one
received VRRP
advertisement message.
Virtual router ID mismatch
of one received VRRP
advertisement message.
Advertisement interval
mismatch of one received
VRRP advertisement
message.
A virtual MAC address is
added into switch L2 table
A virtual MAC address is
deleted from switch L2
%d, %s, port id: %d, %s, device
class: %d)
Incompatible LLDP-MED TLV
set detected (on port %d.
chassis id: %d, %s, port id: %d,
%s, device class: %d)
New surveillance device
detected (Port <portNum>, MAC
<macaddr>)
Port < portNum > add into
surveillance VLAN <vid >
Port < portNum > remove from
surveillance VLAN <vid >
OSPF interface <intf-name>
changed state to [Up | Down]
OSPF protocol on interface <intf-
name> changed state to
[Enabled | Disabled]
OSPF interface <intf-name>
changed from area <area-id> to
area <area-id>
OSPF nbr <nbr-id> on interface
<intf-name> changed state from
Loading to Full
OSPF nbr <nbr-id> on interface
<intf-name> changed state from
Full to Down
OSPF nbr <nbr-id> on interface
<intf-name> dead timer expired
OSPF nbr <nbr-id> on virtual link
changed state from Loading to
Full
OSPF nbr <nbr-id> on virtual link
changed state from Full to Down
OSPF router ID changed to
<router-id>
OSPF state changed to Enabled
OSPF state changed to Disabled
VR <vr-id> at interface <intf-
name> switch to Master
VR <vr-id> at interface <intf-
name> switch to Backup
VR <vr-id> at interface <intf-
name> switch to Init
Authentication type mismatch on
VR <vr-id> at interface <intf-
name>
Authentication fail on VR <vr-id>
at interface <intf-name>. Auth
type <auth-type>
Received an ADV msg with
incorrect checksum on VR <vr-
id> at interface <intf-name>
Received ADV msg virtual router
ID mismatch. VR <vr-id> at
interface <intf-name>
Received ADV msg adv interval
mismatch. VR <vr-id> at
interface <intf-name>
Added a virtual MAC <vrrp-mac-
addr> into L2 table
Deleted a virtual MAC <vrrp-
mac-addr> from L2 table
1081
notice
Informational
Informational
Informational
Informational
Informational
Informational
Notice
Notice
Notice
Notice
Notice
Informational
Informational
Informational
Informational
Informational
Informational
Warning
Warning
Warning
Warning
Warning
Notice
Notice

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Xstack dgs-3120-24tc

Table of Contents