D-Link xStack Reference Manual page 1083

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
whole device in 5 minutes
WAC When a client host
authenticated successful.
When a client host fails to
authenticate.
The authorized user
number on whole device
reaches the max user
limit.
The authorized user
number on whole device
is below the max user limit
in a time interval(interval
is project depended).
IMPB Unauthenticated IP
address encountered and
discarded by IP-MAC port
binding
Dynamic IMPB entry is
conflict with static ARP
Dynamic IMPB entry is
conflict with static FDB
Dynamic IMPB entry
conflicts with static IMPB
Creating IMPB entry failed
due to no ACL rule
available
Port shutdown due to the
DHCP rate excludes the
rate limiting
Port recovery due to the
DHCP auto-recovery timer
is timeout
IP and Password IP Address change activity
Changed
Password change activity
Safeguard Safeguard Engine is in
Engine normal mode
Safeguard Engine is in
filtering packet mode
Packet Storm Broadcast strom
occurrence
Broadcast storm cleared
WAC authenticated user
(Username: <string>, IP: <ipaddr
| ipv6address>, MAC:
<macaddr>, Port: <[unitID:]
portNum>)
WAC unauthenticated user (User
Name: <string>, IP: <ipaddr |
ipv6address>, MAC: <macaddr>,
Port: <[unitID:]portNum>)
WAC enters stop learning state.
WAC recovers from stop
learning state.
Unauthenticated IP-MAC
address and discarded by IMPB
(IP: <ipaddr>, MAC: <macaddr>,
Port <[unitID:]portNum>)
Dynamic IMPB entry conflicts
with static ARP(IP: <ipaddr>,
MAC: <macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry conflicts
with static FDB(IP: <ipaddr>,
MAC: <macaddr>, Port
<[unitID:]portNum>)
Dynamic IMPB entry conflicts
with static IMPB(IP: <ipaddr>,
MAC: <macaddr>, Port
<[unitID:]portNum>)
Creating IMPB entry failed due
to no ACL rule being
available(IP:<ipaddr>, MAC:
<macaddr>, Port
<[unitID:]portNum>)
Port < [unitID:] portNum> is
currently shut down due to the
DHCP rate excludes the rate
limiting
Port < [unitID:] portNum> is
currently recovery due to the
DHCP auto-recovery timer is
timeout
[Unit <unitID>,] Management IP
address was changed by
console(Username:
<username>,IP:<ipaddr>)
[Unit <unitID>,] Password was
changed by console (Username:
<username>,IP:<ipaddr> )
[Unit <unitID>] Safeguard Engine
enters NORMAL mode
[Unit <unitID>] Safeguard Engine
enters EXHAUSTED mode
Port <[unitID:]portNum>
Broadcast storm is occurring
Port <[unitID:]portNum>
Broadcast storm has cleared
1078
Informational
Warning
Warning per system
Warning per system
Warning
Warning
Warning
Warning
Warning
Warning
Informational
Informational "console" and "IP:
<ipaddr>" are
XOR shown in log
string, which
means if user login
by console, there
will no IP
information for
logging.
Informational "console" and "IP:
<ipaddr>" are
XOR shown in log
string, which
means if user login
by console, there
will no IP
information for
logging.
Informational
Warning
Warning
Informational