D-Link xStack Reference Manual page 1103

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
topologyChange
risingAlarm
fallingAlarm
LLDP
vrrpTrapNewMaster
vrrpTrapAuthFailure
subsequent to
its election. Implementation of this trap is
optional.
A topologyChange trap is sent by a bridge
when
any of its configured ports transitions from
the
Learning state to the Forwarding state, or
from
the Forwarding state to the Blocking state.
The
trap is not sent if a newRoot trap is sent for
the
same transition. Implementation of this trap
is
optional.
The SNMP trap that is generated when an
alarm
entry crosses its rising threshold and
generates
an event that is configured for sending
SNMP
traps.
Binding
1: alarmIndex
2: alarmVariable
3: alarmSampleType
4: alarmValue
5: alarmRisingThreshold
The SNMP trap that is generated when an
alarm
entry crosses its falling threshold and
generates
an event that is configured for sending
SNMP
traps.
Binding
1: alarmIndex
2: alarmVariable
3: alarmSampleType
4: alarmValue
5: alarmFallingThreshold
This trap is initialed when a LLDP entry is
added to or deleted from remote DB.
The newMaster trap indicates that the
sending agent has transitioned to 'Master'
state.
Binding objects:
(1) vrrpOperMasterIpAddr
A vrrpAuthFailure trap signifies that a packet
has been received from a router whose
authentication key or authentication type
conflicts with this router's authentication key
1098
1.3.6.1.2.1.17.0.2
1.3.6.1.2.1.16.0.1
1.3.6.1.2.1.16.0.2
1.3.6.1.2.1.1.3.0
1.3.6.1.6.3.1.1.4.1.0
1.0.8802.1.1.2.1.2.2
1.0.8802.1.1.2.1.2.3
1.0.8802.1.1.2.1.2.4
1.0.8802.1.1.2.1.2.5
1.3.6.1.2.1.68.0.1
1.3.6.1.2.1.68.0.2