D-Link xStack Reference Manual page 767

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
79-14 create pim static_rp group
Description
This command is used to create a static RP.
Format
create pim static_rp group <network_address> rp <ipaddr>
Parameters
group - Specify to assign the multicast group address for this static RP.
<network_address> - Enter the multicast group address used here.
rp - Specify the IP address used by this static RP.
<ipaddr> - Enter the IP address used here.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To create a static RP:
DGS-3120-24TC:admin#create pim static_rp group 239.1.1.0/24 rp 10.52.33.18
Command: create pim static_rp group 239.1.1.0/24 rp 10.52.33.18
Success.
DGS-3120-24TC:admin#
79-15 delete pim static_rp group
Description
This command is used to delete a static RP.
Format
delete pim static_rp group <network_address>
Parameters
<network_address> - Enter Specify the multicast group address that will removed from the static
RP.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
762