D-Link xStack Reference Manual page 1092

®
xStack DGS-3120 Series Layer 3 Managed Gigabit Switch CLI Reference Guide
swPowerFailure
swPowerRecover
swUnitInsert
swUnitRemove
swUnitFailure
swUnitTPChange
swUnitRoleChange
lldpRemTablesChange
lldpXMedTopologyChangeDetected
swDdmAlarmTrap
3. agentLoginUserName
Power Failure notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
Power Recover notification.
Binding
1. swPowerUnitIndex
2. swPowerID
3. swPowerStatus
Unit Hot Insert notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
Unit Hot Remove notification.
Binding
1. swUnitMgmtId
2. swUnitMgmtMacAddr
Unit Failure notification.
Binding
1. swUnitMgmtId
The stacking topology change notification.
Binding
1. swStackTopologyType
2. swUnitMgmtId
3. swUnitMgmtMacAddr
The stacking unit role change notification.
Binding
1. swStackRoleChangeType
2. swUnitMgmtId
A lldpRemTablesChange notification is sent
when the value of
lldpStatsRemTableLastChangeTime
changes. It can be utilized by an NMS to
trigger LLDP remote systems table
maintenance polls.
Binding
1. lldpStatsRemTablesInserts
2. lldpStatsRemTablesDeletes
3. lldpStatsRemTablesDrops
4. lldpStatsRemTablesAgeouts
A notification generated by the local device
sensing a change in the topology that
indicates that a new remote device attached
to a local port, or a remote device
disconnected or moved from one port to
another.
Binding
1. lldpRemChassisIdSubtype
2. lldpRemChassisId
3. lldpXMedRemDeviceClass
The trap is sent when any parameter value
exceeds the alarm threshold value or
recover to normal status depending on the
configuration of the trap action.
1087
1.3.6.1.4.1.171.12.11.2.2.2.0.2
1.3.6.1.4.1.171.12.11.2.2.2.0.3
1.3.6.1.4.1.171.12.11.2.2.1.0.1
1.3.6.1.4.1.171.12.11.2.2.1.0.2
1.3.6.1.4.1.171.12.11.2.2.1.0.3
1.3.6.1.4.1.171.12.11.2.2.1.0.4
1.3.6.1.4.1.171.12.11.2.2.1.0.5
1.0.8802.1.1.2.0.0.1
1.0.8802.1.1.2.1.5.4795.0.1
1.3.6.1.4.1.171.12.72.4.0.1