Life Fitness 9500HR Operation Manual page 57

Hide thumbs Also See for 9500HR:

Standby Mode - This feature enables fitness club managers to set periods at which the treadmill

automatically powers up or powers down. While in the Manager's Configuration, select the

STANDBY SETUP option. The MESSAGE CENTER displays the statement, STANDBY

DISABLED. Using the ARROW keys, switch the setting to ENABLED. The MESSAGE CENTER

displays an AUTO OFF value, which is the time of day, in hours and minutes, at which the tread-

mill automatically switches off. Use the TIME ARROW key to change the hours, and use the

INCLINE ARROW key to change the minutes. Press ENTER. The MESSAGE CENTER displays

an AUTO ON value, which is the time of day, in hours and minutes, at which the treadmill auto-

matically switches on.

ZerOut

Speed Control - If, during a workout, a user decreases the speed to the minimum and

continues to hold the SPEED DOWN arrow, the speed falls to 0 MPH, which is pause mode. The

minimum speed is 0.5 MPH, unless changed in the Manager's Configuration.

InstaPace

Feedback - This feature enables users to monitor pace, or rate of minutes per mile,

while running on the treadmill. It must be enabled in the Manager's Configuration. Also, the

treadmill speed must be at least 4.5 MPH. The MESSAGE CENTER displays the MPH and pace

simultaneously when the user adjusts the treadmill speed with the ARROW keys. If the user

adjusts the speed using the NUMERIC keypad, the MESSAGE CENTER displays the pace after

the treadmill reaches the new speed.

Life Fitness and Heart Rate Zone Training are registered trademarks of Brunswick Corporation.

Polar is a registered trademark of Polar Electro, Inc.

M051-00K58-A052

11/01

9700hr