Life Fitness 9500HR Operation Manual page 56

Hide thumbs Also See for 9500HR:

EATURES

Custom Plus Programming Modifications - The Manager's Configuration provides new

features for creating custom workouts:

•

When programming an interval workout, the user may select a speed and an incline

grade for each interval.

•

Each interval is now identified by the time at which it occurs during the workout.

Programming a Distance Goal in .10-mile increments - When a user sets up a DISTANCE

GOAL workout with the TIME ARROW keys, the MESSAGE CENTER displays the distance goal

values in .10-mile increments.

MaxTime

Control Option - This feature enables fitness club managers to set workout duration

limits during peak and non-peak hours of club traffic. After entering the Manager's Configuration,

select the MAXTIME SETUP option. The MESSAGE CENTER displays the statement "MAX-

TIME CONTROL OFF" and then displays a maximum workout duration value. The default value

is 60 minutes, and it can be changed with the INCLINE or SPEED ARROW keys. This value is

always in effect unless the Maxtime

the INCLINE or SPEED ARROW keys, and switch the setting to MAXTIME CONTROL ON.

Then, press ENTER.

The MESSAGE CENTER displays a PEAK DURATION value, which is the maximum possible

workout duration, in minutes, during high-traffic hours. Use the ARROW keys or the NUMERIC

keypad to increase or decrease the displayed value, and press ENTER. The MESSAGE CEN-

TER then displays a NON-PEAK DURATION value, which is the maximum possible workout

duration all other times. Use the ARROW keys or the NUMERIC keypad to increase or decrease

the displayed value, and press ENTER.

The MESSAGE CENTER then displays a PEAK 1 time period in hours and minutes. This is the

period during which the peak workout duration value is in force. Use the TIME ARROW keys to

change the hours, and use the INCLINE ARROW keys to change the minutes. Press ENTER.

The MESSAGE CENTER then displays the PEAK 1 duration value, which is the amount of time

in minutes that the peak period remains in force. Using the ARROW keys, change the value, and

press ENTER.

The MESSAGE CENTER then displays a PEAK 2 time period. Repeat the steps described in the

preceding paragraph to set up a second peak time.

control feature is turned on. To turn the feature on, use

9700hr