Life Fitness 9500HR Operation Manual page 37

CONFIGURATION
SETTING
LANGUAGE
MAXTIME SETUP
STANDBY MODE SETUP
ENGLISH/METRIC UNITS
CUSTOM WORKOUT ENTRY
TELEMETRY
SMART STOP
MAXIMUM SPEED
MINIMUM SPEED
PAUSE TIMEOUT
WATTS DISPLAY
METS DISPLAY
PACE DISPLAY
CALORIE PER HOUR DISPLAY
DISTANCE CLIMBED DISPLAY
WAX REMINDER
ACCELERATION RATE
DECELERATION RATE
ERASE CUSTOM WORKOUTS
MAXIMUM INCLINE
FACTORY
DEFAULT
ENGLISH
OFF
OFF
ENGLISH
N/A
ON
ON
12.0 (MPH) for 9500HR
12.0 (MPH) for 9700HR
0.5 (MPH)
1 (minute)
OFF (Int'l: ON)
OFF
ON
ON (Int'l: OFF)
OFF
OFF
3
3
N/A
15.0
DESCRIPTION
The language of the MESSAGE CENTER display. Choices
include Portugese, Spanish, Dutch, Japanese, Italian, French,
and German.
This feature enables fitness club managers to set workout
duration limits during peak and non-peak hours of club traffic.
If the setup is off, no duration limits are set. See the topic
titled Using the MaxTime
T
following page.
This feature enables fitness club managers to set periods at
which which the treadmill automatically powers up or
powers down. See the topic titled Using the Standby Mode
Setup, which appears on a following page.
The measurement unit type for weight, distance, and speed.
See Programming Custom Workouts in Section 4.
Switching on the telemetry feature makes it possible to use the
Polar®-compatible Heart Rate Zone Training exercise chest
strap for monitoring the heart rate.
This feature automatically pauses the workout if the user steps
off the belt.
This is the fastest speed at which the treadmill can run.
The value can be increased to 15.0 MPH on the 9700HR.
This is the slowest speed at which the treadmill can run.
This is the maximum time during which a workout can remain
in pause mode.
If this option is enabled, the MESSAGE CENTER displays the
Watts equivalent of the step rate.
If this option is enabled, the MESSAGE CENTER displays the
METs equivalent of the step rate.
This feature displays the rate of minutes per mile.
If this option is enabled, the MESSAGE CENTER displays the
number of calories burned per hour during the workout.
The total distance climbed, based on the incline and speed of
the treadmill.
After the first 100 hours, then every 168 hours, the MESSAGE
CENTER displays, "MAINTENANCE REMINDER - CLEAN
THE NOZZLE."
The rate at which the treadmill speeds up to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
The rate at which the treadmill speeds up to the selected speed,
ranging from 1 (slowest) to 5 (fastest).
This option erases all custom workouts in a single step.
This option changes the maximum incline grade to a value
lower than 15 percent.
Setup, which appears on the