Table of Contents
Advertisement
43-776.fm Page 29 Friday, August 13, 1999 3:34 PM
TROUBLESHOOTING
We do not expect you to have any problems with your TAD-1017, but if you do, try
these suggestions. If you still have problems, take your TAD-1017 to your local Ra-
dioShack store for assistance.
Problem
There is no dial tone.
You hear noise in the hand-
set, and none of the keys
work.
Noise, static, or weak signal
when the phone is away
from the base.
Noise, static, or weak signal
even when the phone is
near the base.
The TAD does not answer
calls.
The TAD does not record
callers' messages.
Suggestion
Check all phone line connections.
Make sure the AC adapter and battery pack are
properly connected.
Make sure the battery pack is properly charged.
The handset loses the security access-protection
code when the battery pack loses its charge. To
correct this, place the handset on the base (see
"Connecting and Charging the Battery Pack" on
Page 12).
Make sure the AC adapter and battery pack are
properly connected.
Press
to change the channel (see "Changing
CH
the Channel" on Page 15).
Move the handset closer to the base or relocate
the base.
Press
to change the channel (see "Changing
CH
the Channel" on Page 15).
Make sure the base's antenna is in a vertical posi-
tion.
Make sure the TAD is turned on.
Make sure the AC adapter and battery pack are
properly connected.
Check all phone line connections.
is set to
REC TIME
ANN
it to
or
.
1
4
Delete messages if memory is full.
(announcement only). Set
29
Advertisement
Table of Contents
