Radio Shack TAD-1017 Owner's Manual page 25

43-776.fm Page 25 Friday, August 13, 1999 3:34 PM
Press
PLAY/SKIP
press
FLASH/REMOTE
the handset. The TAD announces the
number of messages and whether the
messages are old (already listened to)
or new. Then each new message
plays, followed by the day and time it
was recorded.
When you have both old and new
messages, the TAD first plays back
only new messages. After you have
listened to the new messages, you
can listen to all messages (old then
new) by pressing
PLAY
While playing back the messages, the
display shows the number of the cur-
rent message. For example, if you
have a total of four messages (one
old, three new), pressing
plays 2 (the first new message).
If there are no messages when you
press , five beeps sound and the
PLAY
TAD announces "You have no mes-
sages."
on the base, or
then on
PLAY/2
again.
dis-
PLAY
Notes:
• If the TAD detects a busy signal or
silence for more than 7 seconds
while recording a message, it
stops recording and releases the
call.
• When you play back messages
using the handset, the message
number does not appear on the
display.
To skip to the next message, press
(or on the handset).
PLAY/SKIP SKIP/3
To play the current message again,
press (or
REPEAT REPEAT/1
handset).
Note: If you press
REPEAT
seconds after a message begins play-
ing, the TAD repeats the previous
message.
on the
within 2
25