Playback - Swann Advanced series Easy Setup Manual

The Playback Interface
Assuming that you've used the
default installation paths, you
can access the playback software
by selecting the desktop icon
named Playback Software, or
fi nding the program group of
the same name in your Start
Menu.
This will take you to the default
interface of the

playback

software, as shown to the right.
Opening Files:
•
•
•
To remove a fi le from the playlist,
-
highlight it and click the button.
x
The button removes all fi les from the
playback list.
Playback Controls
The playback controls are located at the bottom of the playback interface. They
operate in the same manner as those found on the DVR's playback interface (see
"Playback" on page 37).
The camera icon (located in the centre of the playback controls) will save a screenshot
as a BMP (bitmap) fi le to C:\Capture\
40
Choose the + icon, and select either FILES or
FOLDER.
If you chose to open a FOLDER, select the
folder you'd like to open from the fi le tree.
Typically, this will be X:\RecordFile (where "X"
is the drive letter assigned to your fl ashdrive).
To open single fi les, choose FILES. You'll need
to locate the fi les using a standard fi le browser
(below), and then simply highlight the fi les
you want and choose OPEN.
Playback
This is an example of the PLAYBACK interface, currently showing quad view.
Channels 1, 3 and 4 were not recording at this time.
The playback controls are displayed across the bottom of the screen.
They are as follows:
Rewind Slow Play
Mute Volume
Bar
Pause Fast
Forward
Volume
Close
Level Playback
37