Swann Advanced series Easy Setup Manual page 19

Language Menu
Language Menu
• Using the mouse or the arrow buttons, select the drop-down menu of languages.
• Choose the language that best suits your needs.
• Confi rm your choice by pressing select or left clicking the option.
A note on languages
Unless you really want to change the language of the DVR menus, stay
away from this setting. Having the menus in a foreign language can make
it diffi cult to get back to the menu to put the setting back to the right one!
Having said that, if you do change it by mistake (or the DVR is in a non-native
language when you get it) in the main menu, select the icon in the bottom
right, then in the SYSTEM menu, LANGUAGES is the icon in the bottom left.
That will bring you to the drop down menu where you can change languages.
60
Main Menu: Opens the Main Menu of the DVR. See
page 18.
Multi-pics: Select from all available viewing modes,
and which channels you'd like to display. You can ac-
cess the same options by using the viewing modes
select button.
PIP (Picture In Picture): Accesses a list of available
PIP modes. You can also access and cycle through
these modes using the PIP button on the remote
control.
Rec Search: Opens the Record (Video) Search menu, as detailed on "Record (Video) Search"
on page 33.
Mute On/Off : Turns the audio on or off .
Start/Stop Rotate: Initiates the automatic display rotation. Channels will be dis-
played sequentially on an automatic loop. To set the rotate time, see page "Video /
Audio Setup Menu" on page 57. If Rotate has already been turned on, then this
option will change to Stop Rotate, which will disable the rotate function.
Start/Stop Cruise: This will initiate the cruise mode for PTZ devices. You'll need to
have confi gured your PTZ device using the PTZ Confi guration menu (page 46)
and then programmed a series of preset points (see "Setting up Cruise Mode" on
page 65) to use as a series of cruise movements.
Lock (only appears once a password has been set - see "User Setup Menu" on
page 55): Locks the DVR's user interface. Unlocking the DVR requires a correct
username and password combination.
Left: The Multi-Pics options. There are
four options for quad (2 x 2) view, two
options for eight channels (3 x 3) and
one option for all sixteen (4 x 4).
17