Remote Control - RCA Professional Series Owner's Manual

Controls and Displays

Remote Control

RECEIVER
1
MIDNIGHT
LOUDNESS
2
STANDARD
3
INPUT
4
5
BAND
TUNER EDIT
6
1 RECEIVER (POWER)
Switches the receiver between on and
standby.
2 MIDNIGHT LOUDNESS (page 31)
Use to switch to Midnight or Loudness
listening.
3 LISTENING MODE buttons
STANDARD
Press for Standard decoding and to
switch between the various Pro Logic II
options.
26
INPUT SELECTOR
DVD/LD TV/SAT CD
POWER
CD-R VCR
TUNER
TAPE/MD DVR
ADVANCED
MASTER
STEREO
SURROUND VOLUME
FL
ATT DIMMER
MUTE
TUNING P-SET
CLASS MPX DISPLAY
SETUP
ENTER
SET
CH SELECT
TEST
LEVEL EFFECT
TONE
A/V SYSTEM REMOTE
OSR
STAV-4180
(pages 28, 30, 37)
ADVANCED SURROUND
Use to switch between the various
surround modes.
STEREO (/DIRECT)
Switches stereo and direct playback.
Direct playback bypasses the tone
controls and channel levels for the most
accurate reproduction of a source.
7
4 INPUT ATT
Use to attenuate (lower) the level of an
analog input signal to prevent distortion.
8
5 FL DIMMER
Use this button to make the fluorescent
9
display (FL) dimmer or brighter.
6 TUNER EDIT (pages 39–40)
Press to memorize and name a station for
10
recall using the
11
7 INPUT SELECTOR buttons
Use to select the input source.
12
8 Volume buttons
Use
MASTER VOLUME +
listening volume. Use
sound or restore the sound if it has been
muted.
9 Tuner controls
The
TUNING
find radio frequencies. The
buttons can be used to select preset radio
stations (pages 39–40).
(page 38)
BAND
Use to switch between the AM and FM
bands when the tuner is selected.
(pages 39–40)
CLASS
Use to switch between the three banks
(classes) of station presets.
(pages 28, 30)
(pages 28, 29)
@/# buttons.
P–SET
/ to set the overall
–
to mute the
MUTE
@/# buttons can be used to
P–SET
@/#