Playing Other Sources; Selecting The Multi-Channel Analog Inputs - RCA Professional Series Owner's Manual

Playing Sources

Playing Other Sources

1 Turn on the power of the playback
component.
2 Turn on the power of the receiver's
power.
3 Select the source you want to
playback.
Use the
INPUT SELECTOR
the remote (or the
the front panel).
4 Start playback of the component
you selected in step 1.
Selecting the Multi-
Channel Analog Inputs
Connect a DVD player with 5.1 channel
output to listen to 5.1 channel playback.
1 Select
DVD/LD
selected.
Use the
INPUT SELECTOR
the remote (or the
the front panel).
32
INPUT SELECTOR
RECEIVER DVD/LD TV/SAT CD
POWER
CD-R VCR
TUNER
TAPE/MD DVR
buttons on
dial on
MULTI JOG
if it is not already
buttons on
dial on
MULTI JOG
2 Press
SIGNAL SELECT
panel) repeatedly to select
To cancel 5.1 channel playback, use the
SIGNAL SELECT
input signal (other than
Notes:
• When 5.1 channel playback is selected,
you cannot use the
,
INPUT ATT TONE
buttons, as well as the
LOUDNESS
Standard, Advanced Surround, and
Stereo Direct sound modes.
• When 5.1 channel playback is selected,
only the volume and channel levels can
be set.
(front
5.1 ch
button to select an
).
DVD 5.1 ch
SIGNAL SELECT,
, and
MIDNIGHT
.