Inserting Batteries Into Remote Control; Set Up And Maintenance Of The Receiver; Important Note - RCA RTD250 Instruction Book

Inserting Batteries into Remote Control
Insert two AAA batteries according to the + and - signs on
the battery compartment. To use the remote control, point
it directly at your receiver,
Set up and Maintenance of the Receiver
IMPORTANT NOTE
• Provide spaces for sufficient ventilation as indicated
below, If the space is insufficient, the unit may overheat
resulting in malfunction and shorter life time.
10cm/4"
• Do not connect to the AC power cords until all connec-
tions are completed.
• Do not use your set immediately after transferring it from
a cold place to a warm place: there is risk of condensation,
• Do not expose your set to water and excessively high
temperatures,
• After having disconnected your set, clean the case with a
soft cloth, or with a slightly damp leather chamois. Never
use strong solvents,
Disc handling precaution:
• Do not touch the recorded surface.
• Do not use record cleaning sprays, solvent or anti-static
liquid.
• If the disc is dirty, clean it with a damp cloth and wipe
from the center out. Wipe in straight line and not in circu-
lar motion.
• Do not attach stickers, label on the disc,
• Store the disc in its case after playing.