Getting Started; Unpack The Receiver; Inserting Batteries Into Remote Control; Set Up And Maintenance Of The Receiver - RCA RT2300 User Manual

Hide thumbs Also See for RT2300:
Table of Contents

Advertisement

RT2300(R)/RT2400(R)
rev 2
9/2/99
3:29 PM
Page 6
Unpack the Receiver
Check that you received the following
items with
the receiver:
• one receiver unit;
• one RCA Universal Remote Control
(CRK76AD1);
• one external FM Dipole antenna;
• one external AM loop antenna;
• one instruction book;
• one owner registration/survey
card;
• and one safety leaflet.
• one pair of AA batteries;
• one audio cable (two wires) with red and
white RCA connectors;
• one video cable (single wire) with yellow
RCA connectors;
Inserting batteries into
remote control
Insert two AA(R6) batteries with the + and- on the
battery compartment. To use the remote control, point
it directly at your receiver.
Set up and Maintenance of
the Receiver
• Providespacesfor sufficient ventilation as
indicated:
10cm
,_10 cm
IIIIIIIII IIIIIIIII IIIIIIIII IIIIIIIII IIIIIIIII
IIIIIIIII IIIIIIIII IIIIIIIII IIIIIIIII IIIIIIIII
0
Do not connect to the AC power cords until
all of the connections are completed.
Do not use your set immediately after transfer
from a cold place to a warm place: risk of
condensation.
Do not expose your set to water projections and
excessively high temperatures.
After having disconnected your set, clean the case
with a soft cloth, or with a slightly humid chamois
leather. Never use strong solvents.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rt2300rRt2400rRt2400

Table of Contents