Display - RCA Professional Series Owner's Manual

Controls and Displays

Display

1
SIGNAL
DIGITAL
ANALOG DTS
1 SIGNAL SELECT indicators
Lights to indicate the type of input signal
assigned for the current component:
: Lights when
AUTO
is on.
: Lights when a digital audio
DIGITAL
signal is detected.
2 2
2 DIGITAL 2 2
Digital signal is detected.
: Lights when an analog signal
ANALOG
is detected.
: Lights when a source with DTS
DTS
audio signal is detected.
2 DTS
When the Standard mode of the receiver
is on, this lights to indicate decoding of a
DTS signal.
3 2 DIGITAL
When the Standard mode of the receiver
is on, this lights to indicate decoding of a
Dolby Digital signal.
4 2 PRO LOGIC II
When the Standard mode of the receiver
is on, this lights to indicate Prologic II
decoding.
24
2
AUTO
DIGITAL
10
signal select
AUTO
: Lights when a Dolby
4 5
3
DIGITAL ATT DIRECT
PROLOGIC
MIDNIGHT
ADV.SURR. LOUDNESS
11
5 ATT
Lights when
attenuate (reduce) the level of the input
signal (can only be used with an analog
signal).
6 DIRECT
Lights when source direct playback is in
use. This function bypasses all tone,
balance, DSP and Dolby Surround
effects.
7 MIDNIGHT
Lights during Midnight listening.
8 MONITOR
Lights when
9 Speaker indicator
Shows if the speaker system is on or not.
SP
SP
connected.
10 Character display
11 ADV. SURR (Advanced Surround)
Lights when one of the Advanced
Surround listening modes of the receiver
is selected.
6 7 8
MONITOR
STEREO TUNED
MONO
13
12
is used to
INPUT ATT
is selected.
MONITOR
means speakers are switched on.
A
means the headphones are
9
SP A
dB
14