Audio Adjustments; Audio Control - Kenwood KDC-X494 Quick Start Manual

Audio Adjustments

Audio Control

You can adjust following Audio Control items;
Display Audio item
"SubWoofer" Subwoofer output OFF/ON
"Bass Boost" Bass Boost
"System Q" Preset Equalizer
curve
"Bass Adjust"
"Bass Center FRQ" Bass Center
Frequency*
"Bass Level" Bass level
"Bass Q Factor" Bass Q Factor*
"Bass EXT" Bass Extend*
"Middle Adjust"
"Middle Center Middle Center
FRQ" Frequency*
"Middle Level" Middle level
"Middle Q Factor" Middle Q Factor*
"Treble Adjust"
"Treble Center FRQ" Treble Center
Frequency*
"Treble Level" Treble level
"Balance" Balance
"Fader" Fader
"2Zone Rear Volume" Rear volume during
Dual zone
"SubWoofer Level" Subwoofer level
"Detailed Settings"
"HPF Front" Front High Pass
Filter
"HPF Rear" Rear High Pass Filter Through/40*/60*/80/
"LPF SubWoofer" Low Pass Filter
"Subwoofer Phase" Subwoofer Phase
"2Zone" Dual Zone System ON/OFF
"2Zone F/R Select" Dual Zone output
channel
"Supreme" Supreme setting
"Audio Preset" Audio Preset
†
memoy
"Volume Offset Volume offset
ADJ"
*Function of KDC-X494.
†
Refer to <Audio Preset Memory> (page
Recall> (page 8)
⁄
‡
• "User": The customized Bass, Middle, and Treble levels are
effective.
Range
• You can set Bass, Middle, and Treble for each source.
About Supreme
Technology to extrapolate and supplement with proprietary
Level1/Level2/OFF
algorithm, the high-frequency range that is cut off when
"Rock"/ "Pops"/ "Easy"/
encoding at low bit rate (less than 128Kbps, Sampling
"Top40"/ "Jazz"/ "Game"/
‡
frequency is 44.1kHz).
"Natural"/ "User"
Supplementing is optimized by compression format (MP3
or WMA) and processed according to bit rate.
40/50/60/70/80/100/
The effect is negligible with music that is encoded at high
120/150 (Hz)
bit rate, variable bit rate or has minimal high frequency
–8 — +8 (dB)
range.
1.00/1.25/1.50/2.00
• About Dual Zone System
OFF/ON
Main source and sub source (Auxiliary input) output Front
channel and Rear channel separately.
0.5/1.0/1.5/2.0 (kHz)
- When "2Zone" is set to "ON", the main source sound and
AUX input sound are output to the front speakers and rear
–8 — +8 (dB)
speakers separately.
1.00/2.00
- Set up the channel of sub source by "2Zone".
- Select Main source by [SRC] button.
10.0/12.5/15.0/17.5 kHz
- Adjust the volume of Front channel by Control knob.
- Adjust the volume of Rear channel by "2Zone Rear
–8 — +8 (dB)
Volume".
Left 15 — Right 15 - The Audio Control has no effect on sub source.
- When Bluetooth audio source is selected, set "2Zone F/R
Rear 15 — Front 15
Select" to "Rear". "2Zone" cannot be turned "ON" when this
0 — 35
is set to "Front". While "2Zone" is turned "ON", "2Zone F/R
Select" function is disabled.
–15 — +15 (dB)
1
Select the source to adjust
Through/40*/60*/80/
Press the [SRC] button.
100/120/150/180/220*
For how to select source item, refer to
(Hz)
source selection> (page
2
100/120/150/180/220*
Enter Audio Control mode
(Hz)
Press the [AUDIO] button.
50*/60/80/100*/120/
3
Select the Audio item to adjust
Through (Hz)
Turn the Control knob to select the audio item
Reverse (180°)/
Normal (0°)
for adjustment and then press the [ENTER]
button.
Rear/Front
Press the [
item.
ON/OFF
4
Adjust the Audio item
Recall/Memory
Turn the Control knob.
–8 — ±0 (dB)
5
Determine the setting value
(AUX: -8 — +8)
Press the [ENTER] button.
The previous item is displayed.
8), <Audio Preset
6
Exit Audio Control mode
Press the [
<Power and
4).
] button to return to the previous
] button for at least 1 second.
English
7
|